|MareLube TEF 45™is designed specifically for high
load/extreme pressure anti corrosion, anti seize, and bi-metal
barrier applications. It is a completely waterproof, tenacious,
synthetic grease containing 45% PTFEsub-micron size powder.
This it the highest percentage PTFE available anywhere.
Won’t wash away in fresh or salt water or detergents.
Loads This formulation makes TEF 45 perfect for
high-load/extreme pressure lubrication in a fresh or salt
water environment. This highly adhesive waterproof synthetic
grease lubricates and is designed to mechanically plate
metal surfaces with a PTFE film to provide maximum protection
against friction, wear and corrosion. This combination
enhances load capacity and also gives TEF 45 an extremely
wide operating temperature range.
Stops Corrosion This totally waterproof
and chemical-resistant, synthetic grease prevents corrosion
by adhering to and protecting metal surfaces. It is designed
to seal out water and lubricate under the most demanding
Bi-Metal Barrier This maximum PTFE formulation
also makes TEF 45 ideal for bi-metal anti-corrosion applications.
TEF 45 seals out water and electrolytes from entering
the small gaps around fasteners and between metals. With
45% PTFE micropowder and no volatile solvents or silicones
or petroleum to evaporate, it prevents voids for electrolytes
to be drawn into these gaps and creating a galvanic microcell
that causes corrosion over extended periods of time.
Stops Seizing and Galling When applied
to both surfaces before assembly, it leaves a layer of
45% solid PTFE between threads and all other contacts.
This long-lasting friction barrier, with no volatile solvents,
silicones or petroleum to evaporate, will not cold flow
or dry out. This protection lasts for years until the
hardware is dissembled, preventing seizing and galling.
TEF 45 also acts as a “parting lubricant”
on all surfaces it is applied to.
Electrical Protection TEF 45 protects
and can be used on all electrical connections. It is an
excellent “dielectric” grease and does insulate
or increase the resistance of power connections. The pure
synthetic grease and 45% PTFE micropowder flows out of
the electrical contact points and into the surrounding
gaps. With no volatiles to evaporate, it prevents voids
for electrolytes to be drawn into the connection and prevents
THE ULTIMATE IN CORROSION PROTECTION.
Protects, Lubricates, stops corrosion, prevents seizing
and galling. Won’t wash away in fresh or salt water
Formulated with 45% PTFE sub-micron size powder for maximum
effectiveness. High-load lubrication in a fresh or salt
water environment. Waterproof and prevents corrosion.
Excellent dissimilar metals barrier for long term protection
of all fasteners including stainless steel screws and
bolts used on aluminum. Protects electrical connections
& terminals from corrosion.
- Superior corrosion barrier and anti-seize for screws,
bolts and nuts. Contains no silica.
- Also use on turnbuckles, other rigging fittings, and
- Aids in assembly and disassembly. Excellent for rebuilding
and maintaining outboard lower units and other wet or
submerged metal parts.
- Operating temperature range 20° to 350°F (–7°
to 177°C) with dry film –100° to 600°F
(–73° to 315°C)
- Many commercial & Industrial uses. A premium dielectric
- Pure synthetic grease — Contains no petroleum
— Contains no silica — ISO 9001 Certified.
6cc MareLube Tef
45 - $9.00
30cc MareLube Tef 45 - $12.00