| The SR-3
Sail Saver Jib Roller is
simple and easy to use!
Sold in pairs, these light weight, easily installed rollers
can be used on the spreader tips or life lines to help
skirt the foot of the jib. Sail savers can also be used
on backstays of catamarans or other boats with large roached
mainsails. Center hole is 3/16" and can be drilled
out to 3/8 maximum.
Simple installation with a small screw driver. The unique
locking collar is held in place with a small stainless
steel set screw so there is no need for rigging tape or
wire. The two halves "mate" (slide them together
and they lock) and two clips are snapped on for added
safety. Quick and simple. Easy to put on and also easy
to remove.
|